Europair Benelux S.A, 1325 Dion-Valmont, Belgium
+32 470 65 40 52

Axiale Ventilatoren

Plate-S

Plate mounted axial fan with “compact” motor

Featuring: 

  • Available in 8 sizes with impeller diameter from 300 up to 700mm.
  • Conveyed air: clean, not abrasive.
  • Temperature of conveyed air: -20°C / +50°C
  • Voltage:
    • Three-phase version (T) 400V-3Ph.
    • Single-phase version (M) 230V-1Ph.
  • Frequency: 50Hz.
  • Air flow from motor to impeller: position A (FMG).

 Plate-M

Plate mounted axial fan with „IEC“ motor

Featuring:

  • Available in 10 sizes with impeller diameter from 250 up to 800mm
  • Conveyed air: clean, not abrasive
  • Temperature of conveyed air: -20°C / +50°C.
  • Voltage:
    • Three-phase version (T) 400V-3Ph
    • Single-phase version (M) 230V-1Ph
  • Frequency: 50Hz
  •  Air flow from motor to impeller, position A (FMG).

INTERESSIERT AN UNSEREN PRODUKTEN?

Nehmen Sie mit uns Kontakt auf

RING

Ring axial fan

RING line is ideal when large air capacities are required; in applications for wall, panel or duct fixing. For instance: ventilation of industrial buildings, car parks, stock farms, cooling of electric and refrigerating equipments etc.

Featuring:

  • Available in 13 sizes with impeller diameter from 300 up to 1250 mm
  • Conveyed air: clean, not abrasive.
  • Temperature of conveyed air: -20°C / +50°C.
  • Voltage:
  • Single-phase version (M) 230V-1Ph-50Hz
  • Three-phase version (T) 400V-3Ph – 50Hz
  • Air flow from motor to impeller, position A (FMG)

Duct-S

Ducted compact axial fan

DUCT-S line is designed for large air capacities with low pressures, in duct mounted  applications. For instance: ventilation of industrial plants, car parks, stock farms, cooling of electric and refrigerating equipments, in industrial or marine sectors.

Featuring:

  • Available in 8 sizes with impeller diameter from 300 up to 700 mm.
  • Conveyed air: clean, not abrasive.
  • Temperature of conveyed air: -20°C / +50°C.
  • Voltage:
    • Single phase,  230V-1Ph.
    • Three phase, 400V-3Ph.
  • Frequency: 50Hz.
  • Outer terminal box.
  • Air flow from motor to impeller: position A (FMG).

DUCT-M

Ducted axial fan – „IEC“ Motor

DUCT- M line is suitable when large air capacities with relatively low pressures are required in duct mounted applications. For instance: ventilation and conditioning in naval and mining applications, evaporative towers, heat exchangers, cooling of electric and refrigerating equipments, etc. With this line is possible to attain higher pressures using the multistage version consisting of two single stages fans mounted in series, with contra-rotating impellers.

Duct-M allows the recovery of the air rotative component turning it in pressure, developing up to 2.7 times the pressure of a single fan having the same geometry and speed.

Featuring:

  • Available in 15 sizes with impeller diameter from 310 up to 1600 mm
  • Conveyed air: clean, not abrasive.
  • Temperature of conveyed air: -20°C/+50°C.
  • Voltage:
  • Single phase, 230V-1Ph
  • Three phase, 400V-3Ph
  • Frequency: 50Hz.
  • Air flow from motor to impeller, position A (FMG)

Bifurcated axial fan

This series has been designed for ducted, in-line installations in industrial, commercial and civilian plants. They are suitable to exhaust air from industrial kitchens, ovens, painting cabins up to the temperature of 150°C.

Available in 8 sizes from 400×200 to 1000×500

Featuring:

  • Available in 6 sizes from diameter 500 up to 1.000 mm with 2, 4 pole motors
  • Conveyed air: clean or slightly dusty or greasy, non-abrasive
  • Temperature of conveyed air: -20°C / +150°C
  • Voltage:
    • Three-phase, 400V – 50Hz.
  • Airflow type B from impeller to motor (FGM)
6. Mai 2019